1. Click
“Install the USB
Driver”
and follow the
prompts. Click
“Continue
Anyway”
if you see the
message about software
installa
Ɵ
on.
2. Click
“Install Software”
and follow the instruc-
Ɵ
ons to complete the
installation. The software
is now ready for use.
Logger and So
Ō
ware manuals may also be accessed from the
installa
Ɵ
on screen.
2.2 Connect Reader and Start Track-It So ware
Connect READER to PC USB port with the supplied cable. If
the “Found New Hardware Wizard” appears, follow the
prompts to complete the installa
Ɵ
on. Insert the Track-It
logger into READER. Start the Track-It So
Ō
ware by double-
clicking the Track-It icon (shown right) on your PC desktop or
from the Start menu.
If the USB driver installed
properly, you will see “Device
Connected” displayed in the
lower right hand corner of the
Track-It Software window.
2.3 Con
fi
gure Logger
Select the
“Device Setup”
tab. The so
Ō
ware will automa
Ɵ
cally retrieve
and display the data logger con
fi
gura
Ɵ
on.
Review default factory con
fi
gura
Ɵ
on se
ƫ
ngs and make any neces-
sary changes—sample rates, triggers, alarms, etc. Be sure that the
Ɵ
me and date is set properly.
Click the
“Send Con
fi
g”
bu
Ʃ
on under the Device Con
fi
gura
Ɵ
on
sec
Ɵ
on of the window.
Your data logger is now opera onal!
2
3.0 LOGGER READER
CAUTION – THE LOGGER MAY BE HOT.
DO NOT INSERT INTO READER WHILE HOT.
To con
fi
gure or read data from the logger
you will need the logger READER. This
connects to your PC via a USB A-Male to
Mini-B cable (Fig 2). The reader is powered
via the USB plug, however you can also
power the READER through the DC Power
socket. (Fig 3) Use a 9-volt, center posi
Ɵ
ve,
power supply. Monarch part # 6280-022.
Plug the READER into the PC. The “ON”
LED will light (Fig 4). Insert the logger into
the base - the “READY” LED will light green
(Fig 5). Run the “Track-It
TM
So
Ō
ware”.
Whenever the so
Ō
ware is communica
Ɵ
ng
with the logger the READY LED will light
amber.
Do not remove the logger when
this LED is amber.
3
Figure 2
Monarch Part Number 5396-9911
Figure 3
Figure 4—Data Logger Reader Base
Figure 5
“ON” LED light
“READY” LED light
www.
.com
information@itm.com
1.800.561.8187
