- 23 -
Maintenance
Looking after and maintaining your Mobie Plus is important in order to provide years of use.
The care of the following items will keep your Mobie Plus running at optimum levels.
The connection of the battery and electrodes
•
Ensure the electrode connections are tight and there is no corrosion.
•
The battery should be placed flat inside the battery holder.
Wire Connector
•
Check all the wire connectors regularly.
•
Check the condition of the wiring insulation, including the plug of the charger regularly
•
Contact the dealer if you need to repair or change the damaged connector and
connector joint.
ABS Plastic Cover
•
The control panel, front cover, footboard and back cover are made of durable ABS
plastic with a high quality paint finish. Do not use oil or other chemical liquids to
clean the scooter.
•
Do not put the scooter under a direct water source.
•
A damp cloth works best to wipe the scooter down.
Bearings and Motor/Transmission Parts
•
These components have been lubricated and sealed by the factory therefore do not need
lubricating.
•
Store in a dry environment, if components become damp ensure they are dry before use.
