Monark 891 E/891 E Wingate Option
7
Meter instructions
Batteries:
2 x 1.5 V, R6 (AA)
Storing temperature: -10º C - +60º C
Operating temperature: 0º C - +50º C
Display
RPM
0-250
rev./min.
HR
50-240
bpm
TIME
0:00-99:59
min:sec
SPEED
0-99
km/h or mph
DISTANCE
0.0-99.9
km
FORCE
0.0-7.0
kp
Calories (CAL)
0-999
kcal
WATT
0.7 x RPM
watt
Press any key or move the pedal gives a signal to the
meter that activates all functions.
At the display for heart rate (HR) a heart symbol is
lit which means that the computer is trying to find a
pulse signal from an external source (chestbelt with
electrodes, Art. No: 9339-98 is delivered with the
ergometer). If the meter cannot find such a signal
the HR function is automatically turned off after 30
seconds. When the function is turned off the heart
symbol is not lit any more. The heart rate function
can be turned on again by pressing a key.
The timer starts automatically when pedals are moved.
Meter values for Time, Distance and Calories can be
set to zero by pressing the RESET button for more
than two seconds.
The watt reading in the display is depending on the
pedalling speed. The watts can accordingly be adjusted
by increasing or decreasing the pedalling speed.
Calories are calculated all the time.
Features 891 E and 891 E Wingate Option
891 E
To receive the correct value for calories and watts the
workload (kp) has to be set on the display. Kp value
correspond to the total weight in the weight basket
(weight of the basket, including the weights in it).
Example: The workload is 2.1 kg (weight basket 0.1
kg + 2 x 1 kg weight). Press the kp key to the left on
the meter. Down in the display window figures is now
flashing (kp). Increase or decrease in steps of 0.1 kp
by pressing the kp button (up arrow) or the RESET
button (down arrow) until the reading is corresponding
with the actual or desired kp values (workload) from
the weight basket. After that press the CAL/WATT
button to either show the CAL or WATT figures. At
further press on the CAL / WATT-button the display
toggles between calories and watts.
891 E Wingate Option
To get correct readings for calories and watts the kp
value on the electronic meter has to be set to the same
value as the workload that is the weight of the basket
including the weights in it. The rubber plates are
included in the calibrated weight of the 1 kg weight
basket.
Example: The workload is 3 kg / 6.6 lbs (weight basket
1 kg / 2.2 lbs + 2 x 1 kg / 1.1 lbs weight). Press the
kp key to the left on the meter. Down in the display
window figures is now flashing (kp). Increase in step
by 0.1 with kp button (up arrow) alt. the RESET
button (down arrow) until the value is consistent with
the weight basket, in this case 3.0. After that press the
CAL/WATT button to either show the CAL or WATT
figures. At further press on the CAL / WATT-button
the display toggles between calories and watts.
Do not expose the meter to direct sunlight or extremely
high temperature. Do not use any dissolvents when
cleaning. Use only dry cloth.
Summary of Contents for 891 E Wingate Option
Page 2: ......
