Monark Cardio Care 827 X
6
Operating instruction
Operating instruction
Workload device
Model Cardio Care 827 X has an electronic
workload device which consists of a computer
and servo system in combination with a heavy
flywheel and a brake belt system. Changing the
workload is easily done using the display. Use the
display to choose from a preset training program,
heart rate program for manual mode. For com-
plete instructions on how to use the device please
read chapter, ”Computer spercifications”.
Cycle adjustments
Seat height should be adjusted to a comfortable
position. A suitable height is a slightly bent knee
when the middle of the fot is straight above the
pedal axle with the pedal in its lowest position.
To adjust the seat hight turn the quick release
knob on the seat tube and pull untill the seat post
is loose. See fig: Adjustments.
The handlebar setting shall give a comfortable
position when cycling. During longer exercise
sessions it can be recommended to change hand-
lebar position. To adjust the handlebar loosen
the quick release lever. See fig: Adjustments.
Fig: Adjustments.
1) Quick release bolt
2) Quick release lever
Fig: Display
1) Workload device
1
1
2
Summary of Contents for cardio care 827 x
