Monark cardio care 827 x, Manual

Monark Cardio Care 827 X

 9

Operating instruction

Buttons

ENTER:  

To set function value for TIME, DIST, CAL, PULSE in sleep mode.

RESET:  

Return to main function mode in STOP mode and clear all preset function    

values to zero.

START/STOP:  

To start or stop training.

RECOVERY:  

To test heart rate recovery status.

UP/DOWN:   

To select training mode and adjust function value up/down.

Functions

TIME:  

Count up: No preset target, Time will count up from 00:00 to maximum    

99:59 where each increment is 1 second.

Count down: If training with preset Time, Time will count down from 

preset to 00:00. 

Each preset increment or decrement is 1 minute between 99:00 and 1:00.

SPEED: 

Display current training speed from 0.0 to maximum 99.9 km/h.

RPM:   

Displays current training rotation per minute.

DISTANCE:   

Count up: No preset target, Distance will count up from 0.00 to maximum   

99.90 km with each increment 0.1 km.

Count down: If training with preset target, Distance will count down from    

preset to 0.00. Each preset increment or decrement is 0.1 km between 

0.00 to 99.90. 

CALORIES:   

Count up: No preset target, Calories will count up from 0 to maximum  

990 with 1 cal increment. 

Count down:If training with preset target, Calories will count down from    

preset value to 0. Each preset increment or decrement is 10 cal from 0 to    

990 cal. 

PULSE: 

To display your current heart beat figures soon after the pulse sensor has    

been touched. 

WATT: 

Display of current training watt figures.

RECOVERY:  

After exercising for a period of time, Press RECOVERY button and keep hol 

ding on handgrips. All function display will stop except TIME starts coun-   

ting down from 00:60 to 00:00. Screen will display your heart rate reco- 

very status with the F!, F2 up to F6. F1 is the best and F6 is the worst.  

User may keep exercisiong to improve the heart rate recovery status.

(Press the RECOVERY button again to return to main display.)

TEMPERATURE:   Screen will display room temperature in sleep mode.

CALENDER:  

Screen will display year/month/day in sleep mode.

CLOCK: 

Screen will display time in sleep mode.

Maintenance

Do not expose the computer to direct sunlight or exstremely high temperatures. Do not use solvents 

when cleaning, just a dry cloth.

Error message E1:  Something wrong with the servo system.