Monark Cardio Care 927 E
6
Operating
Instructions
Operating instruction
Workload device
Cycling makes the flywheel rotate and store en-
ergy. Applying a braking resistance - workload
- will make the flywheel loose energy. A change
of the workload is done by turning the worklo-
ad adjusting knob. Turning the knob clockwise
will increase the workload and turning it counter
clockwise will decrease the workload.
Fig: Tension knob.
Cycle adjustments
Seat height should be adjusted to a comfortable
position. A suitable height is a slightly bent knee
when the middle of the fot is straight above the
pedal axle with the pedal is in its lowest position.
To adjust the seat height turn the quick release
bolt on the saddle post and pull untill the saddle
post is loose. See
fig: Adjustments.
The handlebar setting shall give a comfortable
position when cycling. During longer exercise
sessions it can be recommended to change hand-
lebar position. To adjust the handlebar loosen
the quick release lever.
See
fig: Adjustments.
Fig: Tension knob
1
2
Fig: Adjustments.
1) Quick release bolt
2) Quick release lever
Summary of Contents for Cardio Care 927 E
