Mondial Designs Limited HB095 2008, Owner'S Handbook Manual

equipment details

96

equipment details

97

6.   Before returning product or parts they 

should be properly cleaned, in order to 
carry out inspection and repair.

7.   No other warranty is given and no 

personal representative is authorised 
to make any warranty other than that is 
contained herein.

wIndowS

To open, turn knobs anti-clockwise and open 
catches. Swivel the window pane open to the 
desired position and close knobs clockwise to 
lock in the open position. 

To close, reverse the operation. 
All opening windows have two catch positions. 
The first position is for ventilation the second 
seals the window from ventilation and rain.

operatInG InStructIonS  
for BLIndS

closing: 

Grab the end bar in the middle and 

push the blind and flynet together or singly 

(blind - lower end bar) downwards until the 
required position is reached.

opening: Push the end bar of the flynet and / 

or of the blind upwards.

care instructions: 

Clean the blind only with a 

damp sponge. Use only water or with mild suds.
In order to avoid material fatigue, do not leave 

the flynet closed for a long time.

roof LIGHtS

When opening the roof lights, care must be 
taken to release the locking mechanism as the 
unit is raised. 

Roof lights must be fully closed when 

driving. Roof lights provide essential fixed 

levels of ventilation.

mini Heki rooflight 

To open depress button and push bar upwards. 

The rooflight has two open ventilation positions 

and a fully open position. 

The blind and flynet operate independently of 

each other and are engaged by connecting to 
each other and sliding.

midi Heki roof-light 

with operating bar: 

To open, depress button 

and push bar to required position. The rooflight 

has two open ventilation positions and a fully 
open position.

Lipseal: Remove the sliding cover. Open the 

valve-blade by turning the blade-opener knob 
anticlockwise. Clean the seal with water. Dry 
the seal and grease with silicone spray/oil or 
vegetable oil.

Seal of automatic vent: 

Turn the automatic 

vent 60° anticlockwise and remove gently. 
Clean the seal with water. Dry the seal and 
grease with silicone spray/oil or vegetable oil.
To clean the holding tank, empty the tank, and 
rinse with clean water. Use a mild soap to clean 
toilet bowl, seat and cover, as well as exterior 
of toilet unit and holding tank.

NOTE: Do not use strong household detergents 

or cleaners that contain chlorine, solvents or 
acid contents.

wintering/storage

The Thetford Cassette C-200 CW/CWE/CS is 
easily winterised for storage.
Empty remaining fresh water into the bowl by 

activating the flush handle up and down (C-200 
CW) or by pressing the flush button (C-200 

CWE & CS).

Once pump has been cleared and water flow 

has stopped completely, release into waste 

tank. Remove waste tank and empty contents 

in normal way.
To evacuate any remaining water from the fresh 

water tank. place a container underneath the 
drainplug and remove drainplug.
When procedure has been completed replace 
drainplug and waste holding tank (fig. 15). 
Clean the seals and grease them after drying 
(see cleaning and maintenance).
Leave the blade of the holding tank open. 
Do not replace cap on the pour out spout, to 
ventilate the holding tank. (Also grease the seal 
of the pour out spout cap.)

cold weather use

The toilet can be used in cold weather 
conditions provided that the toilet is in heated 
surroundings. If this is not the case, you can use 
a nontoxic antifreeze (propylene glycol) or an 
antifreeze such as those used in car radiators. 
Add the antifreeze to the water in the tank. Add 
the quantity specified in the instructions, paying 
due regard to the safety instructions.

High altitude and warm weather use

Pressure may build up in the holding tank if 
the tank is not inserted while driving at high 
altitudes or in warm weather conditions. The 
automatic holding tank vent will vent the tank 
when there is over- or under-pressure. High 
temperatures may require additional Thetford 

toilet fluid.

thetford warranty

1.   The Thetford Cassette is warranted for one 

year from the date of purchase, please fill in 
and return the warranty card.

2.   The warranty covers replacement 

of defective or flawed parts and the 

inadequate performance of the toilet.

3.   In case of a defect apply to an original 

dealer or Thetford Service Centre with proof 
of purchase.

4.   Defects, which in our judgement occurred 

from misuse, negligence or accident, are 
not covered by the warranty. In addition, 
the warranty does not apply if the product 
is installed or handled improperly or if 

other than the prescribed toilet fluids have 

been used or if the product has been 
altered in any way or has been repaired by 
unqualified persons, or if the serial number 
and/or date has been altered or removed.

5.   Should the original buyer wish to return to 

us parts believed to be defective, the parts 
should be sent prepaid. If we find the parts 
defective and covered by warranty, they will 
be repaired and returned. If warranty does 
not apply or has expired, a nominal charge 
will be made. Any transport costs are for 
the account of the owner.