24
AS 914 TI
User Manual
5.1 OPERATOR POsITION
Figure 9 shows the operator’s positions during
the various work phases:
A Bead breaking
B Tyre demounting and mounting
C Inflation area.
In these conditions, the operator can carry out, monitor and check the outcome of all
tyre change operations and take action in the case of any unforeseen events.
NOTICE
RIsk OF CRUsh INJURY. Column tilting must be performed from work position B
(fig.9), keeping the hands away from moving machine parts
.
WARNING
6. oveRAll DIMenSIonS (mm)
Max. lenght A = 49”
Max. width B = 42”
Max. height H = 78”
C
A
B
9
A
B
h
10
