10
Technical service manual
- Select “Private area”
- Enter your username, password and select “Enter”
- Select “Software Updates” in the new screen.
- In the “Keyword” field, enter the keyword that corresponds to what you want to
download. For example:
- If you want to download the programming software (SAB16X or SAB32F) for the
update via PC enter “SAB”.
- If you want to download the MBU, MBE or SEB FIRMWARE enter the name of the
machine to be updated.
N.B.
The downloaded files are in a compressed format (.zip) and must therefore be
unzipped before they can be used.
UPDATING THE FIRMWARE FOR THE
MBE161 CARD
To update the firmware, the SAB16X programme is necessary. If it is not already instal-
led on the PC to be used for the update, it can be downloaded beforehand as explai-
ned in the previous paragraph. Then launch the “setup.exe” programme to install the
programme.
Important: the SAB16X programme is only compatible with Windows operating
systems 98SE, 2000 and XP Professional.
- With the machine switched off set the deep-switch (A, fig. 2) which is necessary for
the programming based on the card to be updated:
- MBE161: SW1 DSW2 in ON;
Fig. 2
- Connect one end of the serial cable code 8-21100224 to the “JPS1A” connector of the
card (B, fig. 2) and the other end to the RS232 serial port of the PC. If the PC does not
Summary of Contents for MT 2450
