Moneris® iPP320 PIN Pad Merchant Resource Center Quick Install Guide
10
Hardware setup: iPP320 PIN Pad using serial cable
connection
Follow these instructions to set up your iPP320 PIN Pad to use a serial connection to your computer.
1.
Connect the serial cable to the iPP320 PIN Pad and your computer
a.
Plug the PIN Pad serial cable into the empty port on the underside of
the iPP320 PIN Pad.
b.
Fold the latch down and press to secure the cable connection.
c.
Plug the power cable connector into the port at the back of the PIN Pad
serial cable connector.
d.
Plug the PIN Pad serial cable connector into a serial port on your
computer.
e.
Plug the power cable adaptor into a working power outlet.
f.
Wait while the iPP320 PIN Pad powers on.
g.
When the "INIT REQUIRED" screen displays on the iPP320 PIN Pad, go to
step 2 (
Access the iPP320 PIN Pad configuration menu
INIT REQUIRED
LATCH
PIN PAD
SERIAL
CABLE
PORT
IPP320
PIN PAD
PORT
PIN PAD SERIAL CABLE
CONNECTOR
POWER CABLE
CONNECTOR
PIN PAD SERIAL CABLE
CONNECTOR
POWER CABLE
ADAPTOR
