Moneris® iPP320 PIN Pad Merchant Resource Center Quick Install Guide
7
4.
Configure the iPP320 PIN Pad for a USB cable connection
a.
On the "LANGUAGE/LANGUE" screen, select the iPP320 PIN Pad's default
display language:
To enable English as the default language, press the
F1
key (
ENGL
).
For enable French as the default language, press the
F4
key (
FRAN
).
LANGUAGE/LANGUE
ENGL
FRAN
ENGL
b.
When the "CABLE TYPE" menu displays, press the green
key (
USB
).
CABLE TYPE
USB
RS232
USB
c.
When the "QR-CODE" screen displays, press the
F4
key (
OFF
).
QR-CODE
ON
OFF
OFF
d.
When the "BEEP" screen displays, press the
F1
key (
ON
).
BEEP
ON
OFF
ON
e.
When the "PED SERIAL NUMBER" screen displays, press the green
key
to continue.
Note:
The serial number is the iPP320 PIN Pad's terminal ID, which is an
eight-digit number that starts with "61" (e.g., "61012345"). The terminal ID
is also printed on a sticker affixed to the iPP320 PIN Pad.
PED
SERIAL NUMBER
61012345
f.
Wait while the IPP320 PIN Pad reboots.
PINPAD WILL
REBOOT IN
FEW SECONDS,
PLEASE WAIT
g.
When the "INIT REQUIRED" screen displays, go to step 5 (
port the iPP320 PIN Pad is using when connected to your computer
) on
page 8.
INIT REQUIRED
