Using PAYD Pro® for Android™ Reference Guide
79
Other issues (PAYD PIN Pad)
Issue
Solution
The PAYD PIN
Pad and/or
PAYD App stalls
or freezes
midway during
a transaction.
1.
If the card is inserted, remove it from the chip reader.
2.
Close/shutdown the PAYD App.
3.
Power off the PAYD PIN Pad, and then power it on again (see page 47 and 45).
4.
Re-launch the PAYD App, and sign in (see page 36).
5.
Retry the transaction.
The screen
displays the
hardware
manufacturer
name/logo
instead of
"WELCOME/
BONJOUR" .
The PAYD PIN Pad is in Sleep mode.
1.
To use the PAYD PIN Pad while it is in Sleep mode, see page 46.
The PAYD PIN
Pad powers off.
The PAYD PIN Pad may have gone into Sleep mode and then shut down to conserve power.
1.
To power on the PAYD PIN Pad, press the PAYD PIN Pad's power button (see page 43).
2.
If this does not work (the battery charge may be depleted), connect the PAYD PIN Pad
to an external power source via the USB charging cable.
The contactless
reader does not
beep when a
card is
tapped/waved
at the "SWIPE,
TAP OR INSERT
CARD" prompt.
The PAYD PIN Pad battery charge level may be too low.
1. See "TAP NOT ACCEPTED" (page 78).