Moneris PAYD® PIN Pad: Quick Install Guide
5
Power management and the PAYD PIN Pad
Powering on the PAYD PIN Pad
The WELCOME/BONJOUR screen displays when the PAYD PIN Pad is fully powered on (see also
Sleep mode
on
page 6).
Power on WITH USB charging cable
1.
Plug the USB charging cable into the micro-USB port on the PAYD PIN Pad.
2.
Plug the other end of the cable into a powered USB port. (The PAYD PIN Pad beeps and then powers on.)
Power on WITHOUT USB charging cable
Press the Power button on the side of PAYD PIN Pad.
Note: The battery must be sufficiently charged.
Charging the PAYD PIN Pad
1.
Plug the small end of USB cable into the PAYD PIN Pad's micro-USB port located on the side near the
F4
key.
2.
Plug the other end of the USB cable into a powered USB port. If you are using a USB port on your computer,
ensure the computer is turned on.
3.
Wait while the PAYD PIN Pad powers up.
4.
When you see the TELIUM MENU screen, set the PAYD PIN Pad aside, and leave it to charge for 3 hours.
Maintaining battery charge
To maintain battery charge while the PAYD PIN Pad is powered on, connect it to an external power source
via the USB charging cable provided with the PAYD PIN Pad.
Power off the PAYD PIN Pad when it is not in use or being charged (see
Powering off the PAYD PIN Pad
on
page 7).