SmartSELECT Merchant Operating Manual v 2.0
107
Private Label Transactions
c. This item is optional. Select
Primary Network ID
to enter the ID. The
Pri-
mary Network ID
prompt appears with an alphanumeric keypad.
d. Key in the 8-character network ID and press
Enter
. The
Third Party Host
Setup Host #_
menu reappears.
e. Select
Primary Line Speed
to set the modem speed. The
Primary Line
Speed?
prompt appears.
f. Select the appropriate Baud rate. The default is 1200 Baud. The
Third
Party Host Setup Host #_
menu reappears.
•
If you pressed
3201
OR
LAN
on the
Communications Type
prompt, the
Third
Party Host Setup Host #_
menu reappears with
Backup Phone Number
and
3201 Poll Code
enabled.
a. Select
3201 Poll Code
. The
Enter Datapac 3201 Poll Code
prompt appears
with an alphanumeric keypad.
b. Key in the two-character poll code provided by the Third Party Card pro-
vider and press
Enter
. The
Third Party Host Setup Host #_
menureap-
pears.
11. This item is optional.
a. Select
Backup Phone Number
to enter the backup phone number of the
Third Party Host. The
Backup Phone Number
prompt appears with a
numeric keypad.
b. Key in the Backup Phone Number (min. 7, max. 16 digits) and press
Enter
.
The
Third Party Host Setup Host #_
menu reappears.
12. This item is optional.
a. Select
Backup Network ID
to enter the ID. The
Backup Network ID
prompt appears with an alphanumeric keypad. This item is optional.
b. Key in the 8-character network ID and press
Enter
. The
Third Party Host
Setup Host #_
menu reappears.
13. This item is optional.
a. Select
Backup Line Speed
to set the modem speed. The
Primary Line
Speed?
prompt appears.
b. Select the appropriate Baud rate. The default is 1200 Baud. The
Third
Party Host Setup Host #_
menu reappears.
•
If you selected the Visa1 Host Type, go to step 16.
•
If you selected the SNS Host Type, go to step 14.
14. Scroll down and select
Pre-Auth Type
. The
Pre-Auth Type?
prompt appears.
15. Select
Hotel/Rental
. The
Third Party Host Setup Host #_
menu reappears.
16. Press
Exit
. The
Terminal Configuration
menu reappears.
The SmartSELECT is now ready to communicate with Third Party Host. You may
now set up Third Party Cards and assign them to this host.
Summary of Contents for smartselect
