2
Monessen • Kentucky Wildwood Installation Instructions • 4604-907 Rev. A • 05/18
KENTUCKY WILDWOOD KW18-R, KW24-R
AND KW30-R LOG PLACEMENT
LG1169
KW24 log 1
Log #1
Figure 1
1. Place bottom front right log #1 on right pin located on
burner and right grate bar. Figure 1
LG1170
KW24 log #2
Log #2
Figure 2
2. Place bottom rear right log #2 on pin on rear of grate
assembly and push towards rear as far as possible.
Figure 2
LG1171
KW24 log 3
Log #3
Figure 3
3. Place bottom rear left log #3 on pin on left rear of grate
assembly and push towards rear as far as possible.
Figure 3
LG1172
KW24 log 4
Log #4
Figure 4
4. Place bottom front left log #4 on left pin located on
burner and left grate bar. Figure 4
LG1173
KW24 log 5
Log #5
Figure 5
5. Place center left log #5 on top of log #4 on left side
with small end of log #5 under log #3 and on left grate
bar.
Figure 5
6. Place center top log #6 on two (2) pins on top of log #2.
The front end of log #6 should rest on log #4. Figure 6
LG1174a
KW24 log 6
Log #6
Figure 6
NOTE: Installation instructions are the same for 18”,
24”, and 30” log sets. Pictures used in this manual
illustrate the 24” set. Some variation may exist between
the images and the set.
