22
424WBST Designer Woodburning Fireplaces
87D1506
Chimney Components
Round Top Termination Round termination to be used with SK8 chimney
RLTSK8
system. (Flashing not included.)
Long Round Top
Round top to be used with a chase installation
RLTSK8L
Termination
utilizing SK8 chimneysystem.
Knock-down Shroud -
Black pyramid knock-down shroud used for
PKDSBL
Pyramid
chase installations with any RLT round top
termination. Gives appearance of a pyramid cap.
Knock-down Shroud -
Black square knock-down shroud used for
SKDSBL
Square
chase installations with any RLT round top
termination. Gives appearance of a square cap.
Adaptor required
Square Termination
Top housing with simulated brick pattern.
T20B
(Red, Tan or Black) Proper adapter must be
used. Includes flashing.
Adapter
Required adapters for T20B top housing.
CF8CA (SK8)
Housing Extensions
Extends Square Termination on steep pitched roofs. 202036
Flashing
Metal finishing required around Contemporary
8-6-12 with 8" flue:
Termination to prevent rain leakage.
0-6/12 pitch
8-12-12 with 8" flue:
6/12-12/12 pitch
Square Termination
Top housing of simulated brick pattern
T20B
available in red, tan or white. Appropriate
adapter required. Flashing included.
SK8
Pipe used to build 8" SK8 flue systems.
SK81 (1' Long)
Chimney Sections
SK818 (1
Z\₂
' Long)
SK83 (3' Long)
SK84 (4' Long)
Chimney Elbows
Elbow used to create an offset in a
SK830 / 2 (SK8)
chimney system. Only 30° elbows available.
Packaged 2 per carton (offset and return).
Firestop
Required at each floor level of chimney
SKFS2A — SK8
installation. (Plus attic on multi-story installation.)
(8" straight flue)
SKFS6A — SK8
(8" 30° inclined flue)
Chimney Support
Used to support chimney for each of: 20' vertical
SKCS8 - SK8
height and 6' of angled chimney run.
Attic Insulation Shield
Used to prevent insulation from coming in contact
AIS-SK - SK8
with the chimney system.
U.S.
Model Number
Description
Component
