ENGLISH
18
RYDIS
RH750
User’s Manual
1. Turn off and then on (OFF → ON) the main power switch at the rear part with the Power
button of the robot cleaner being pressed.
2. When you press the Power the Suction the Charging button at the same
time for 3 seconds with the battery inserted into the Handle Remote Controller, the Handle
Remote Controller will go into the synchronization mode.
3. After the synchronization, when you press the Power the Suction button at the same
time for 3 seconds, the remote controller will be reset.
4. When you put the Handle Remote Controller holder for 10 seconds with the red LED turned on,
the LED will be turned off, and so, you can use the device.
Another synchronization method
⊙ The main body will be ready for synchronization.
⊙ Now, the display will be turned on and off from the bottom to the top in order, and so, you
cannot use the other buttons of the main body.
① Power Button
Suction button
Charging button
Power button
② Main Power Switch
Summary of Contents for RH750
