Compact Hopper Test Box Instructions TSP063doc Issue 2.1 – June 2004
©
Money Controls 2004. All rights reserved.
Page 8 of 11
4.2
CONT / COUNT
Switch on the power supply.
The display will show the following:-
The left hand side of the display (COUNTER) shows how many coins have been paid out
while the right hand side (CURRENT) shows the current being drawn by the hopper.
Switch “HOPPER / ON” to “ON” to start the hopper paying out coins.
The display will show the following:-
Set the “COUNT” dial to the required number of coins to be paid out.
Press the “OPTO TEST / START COUNT” button.
The display will show:-
As each coin is paid out, the counter will increment by 1 and the “OPTO” LED will flash.
The hopper will stop once the set “COUNT” value has been reached and the display will
show for e.g.:-
Press the “OPTO TEST / START COUNT” button to repeat the required coin payout.
