OPERATING YOUR MCL3400
LOCKING
Lock all the doors by pressing button 1 on the remote control.
The indicators will flash once to confirm locking.
The dash mounted LED will light for 10 seconds as the system checks vehicle integrity and then slow flashes.
UNLOCKING
To unlock all the doors, press remote control button 2. Indicators will flash twice to confirm unlocking.
The dash mounted LED will turn off.
BOOT RELEASE
If you vehicle is equipped with electric release of the boot, it can be connected to this system. This may incur
additional charges. Press button 3 for 2 seconds to open the boot.
CODE HOPPING REMOTE CONTROLS
2 water resistant remote controls are supplied with the MCL3000. Maximum 3 remotes can be used.
This coding system is completely random therefore eliminating the possibility it being copied.
7
REMOTE CONTROL CODE LEARNING
If you need to replace a remote control, it must be memorised to the alarm system before it can be used.
a)
Press the learning button on the side of the central locking module
b)
The indicators will light to confirm learning mode
c)
Press any remote button on 1
st
remote to learn it.
d)
Repeat ‘c’ for any other remotes.
