Safety 1
9
Before every ride, it is important to carry out the following
safety checks. Do not ride a scooter that is not in proper
working condition! Replace any worn or broken parts as
needed.
Accessories
□
Check all parts are secured and functioning correctly before
each ride.
□
All other fittings on the scooter are properly and securely
fastened, and functioning.
□
The rider is wearing a properly fitted helmet (protective gear
if necessary) and that clothing and loose items are properly
constrained.
Bearings
□
All bearings are lubricated, run freely and display no excess
movement, grinding or rattling.
Brakes
□
The front and rear brakes work properly.
□
The brake shoe pads are not overly worn and are correctly
positioned in relation to the rims.
□
The brake control cables are lubricated, correctly adjusted
and display no obvious wear.
□
The brake control levers are lubricated and tightly secured
to the handlebar.
Frame and Fork
□
The frame and fork are not bent or broken.
Steering
□
The handlebar and post are correctly adjusted and
tightened, and allow proper steering.
□
The handlebars are set correctly in relation to the forks and
the direction of travel.
□
The handlebar binder bolt is tightened.
Wheels and Tires
□
The rims do not have dirt or grease on them.
□
The wheels are properly attached to the scooter and axle.
□
The tires are properly inflated within the recommended
pressures displayed on the tires sidewall.
□
The tires have the proper amount of tread, no bulges or
excessive wear.
BEFORE YOU RIDE SAFETY CHECKLIST
