6 Maintenance
30
• Failure to conduct maintenance on the scooter may result
in malfunction of a critical part and serious injury or death.
Proper maintenance is critical to the performance and safe
operation of the scooter.
•
The recommended intervals and need for lubrication and
maintenance may vary depending on conditions the
scooter is exposed to. Always inspect the scooter and
conduct necessary maintenance before each use of the
scooter.
This section presents important information on maintenance
and will assist you in determining the proper course of action to
take if you do have a problem with the operation of the scooter.
If you have questions regarding maintenance please call our
customer service, toll free, at 1-800-626-2811
or see a qualified
bicycle mechanic.
Do not
call the store where the scooter was
purchased.
Correct routine maintenance of your new scooter
will ensure:
•
Smooth running
•
Longer lasting components
•
Safer riding
•
Lower running costs
BASIC MAINTENANCE
The following procedures will help you maintain your scooter for
years of enjoyable riding.
•
For painted frames, dust the surface and remove any loose
dirt with a dry cloth. To clean, wipe with a damp cloth soaked
in a mild detergent mixture. Dry with a cloth and polish with
car or furniture wax. Use soap and water to clean plastic
parts and rubber tires. Chrome plated bikes should be wiped
over with a rust preventative fluid.
•
Store your scooter under shelter. Avoid leaving it in the rain
or exposed to corrosive materials.
•
Riding on the beach or in coastal areas exposes your scooter
to salt which is very corrosive. Wash your scooter frequently
and wipe or spray all unpainted parts with an anti-rust
treatment. Make sure wheel rims are dry so braking
performance is not affected. After rain, dry your scooter and
apply anti-rust treatment. If the hub bearings of your scooter
have been submerged in water, they should be taken out and
re-greased. This will prevent accelerated bearing
deterioration.
•
If paint has become scratched or chipped to the metal, use
touch up paint to prevent rust. Clear nail polish can also be
used as a preventative measure.
•
Regularly clean and lubricate all moving parts, tighten
components and make adjustments as required.
WARNING!
❻
Maintenance
