10
Menu Selection for ConfigureSensor App - RS-485 [Continued]
(Factory Defaults are Shown in Bold)
* Denotes that parameter can also be adjusted
with Modbus communications.
FACTORY
SETTINGS
CABLE LENGTH *
(CSL)
READ ONLY
Defines physical length of cable. Sets max value for relay
threshold & cycle limit. Sounding stops upon measure
reaching value. Also presets the time values in Descend-
Assist of Zone-1.
Range: 1Ft~150Ft typc, 1Ft~200Ft special cases
SMU will periodically report distance measured
thus far while still sounding.
EXISTING
MEASUREMENT *
This option is only viewable when
Descend-Assist is ON.
0.008 ~ 168H