Mono Machines SHREDDER, Operating Manual

1. 

Proper use, warranty 

The shredder is exclusively designed for destroying paper, paperboard and cardboard, as well as small 

quantities of store cards, credit cards, CD-ROMs and floppy disks. Its sturdy drive mechanism is not damaged 

by paper clips and staples. 
We provide a warranty for the device in accordance with our general sales and delivery terms. This warranty 

excludes wear, damage due to improper handling, natural depreciation, and actions taken by third parties. 

2. 

Safety instructions 

Caution: 

If purchased with a baler, it is prohibited to operate only one machine of a combination-version 

machine. Only the combination of a document shredder and a baling press fulfills the requirements 

of EN 294. 

•  Read the operating manual before starting up the shredder. 
•  Do not remove or modify safety devices that provide for the safe operation of the machine. 
•  Observe all safety instructions attached to the machine. 
•  The shredder may not be operated by anyone under 16 years of age. 
•  Carry out inspection and maintenance regularly. 
•  Switch off the shredder, disconnect the power plug and call customer service in the following circumstances: 

- power cables or plugs are damaged 

- liquid has entered the shredder 

- the shredder has been exposed to rain 

- the machine does not work properly despite the operating manual having been observed 

- the shredder has been damaged 

Danger of injury 

Do not reach into the paper feed opening. 

Splinters can cause injury 

Wear protective goggles when destroying diskettes, CDs and hard credit cards. 

Danger of injury during intake 

Do not go near the paper feed opening with long hair, loose clothing, ties, scarves, 

necklaces, bracelets etc. 

Do not destroy any material which might become tangled, such as tapes, binder ties or foil.

Switch off the shredder and pull out the power plug 

before moving or cleaning the shredder, or any other task outside its normal scope of use. 

Maintenance and service tasks may only be performed by: 

•  Customer service 

•  Trained specialist staff (such as electricians) 

•  An authorized service technician 

http://www.monomachines.com

http://www.monomachines.com