FG036- park n ride prover RevA18 09-01-18
8
Warning
Avoid stopping machine with dough left in the pockets as after a time it will adhere to the
pockets and cause the machine to malfunction.
ALWAYS CHECK THE POCKETS FOR ADHERING DOUGH AND REMOVE AS SOON
AS POSSIBLE. DO NOT WAIT FOR DAILY CLEANING IF IN DOUBT.
CAUTION
ISOLATE MACHINE FROM THE POWER SUPPLY BEFORE CLEANING.
1.
Brush infeed chute
(8)
ensuring the dough sensor and reflector are clean.
2.
Remove drive box drawer
(1)
and cleaning door
(2).
3.
Withdraw the plastic trays and remove dough. Wash thoroughly, dry and replace.
4.
Wipe over drawer and door and replace.
5.
Remove clear transfer window
(3).
Wash and dry.
6.
Wipe the window fixing channels and replace window.
7.
Open main overhang door
(4)
and check for fallen pieces of dough inside. Brush rear of
door and close.
8.
Brush conveyor
(5)
(if fitted) and wipe clean the metalwork paying attention to the chute
areas and inner sides.
9.
Remove the moulder from position and clean the conveyor chute
(6)
inside and out paying
attention to edges, corners and the window area.
10.
Wipe over the control panel
(7)
with a
damp
cloth (do not allow moisture to enter the
panel). Pay attention to the switch area removing any residue. (do not use a knife).
7.0 CLEANING
DAILY
KEEP WATER AWAY FROM THE MAIN CONTROL PANEL
AND ELECTRICAL CONNECTION SOCKETS.
3
4
7
1
5
6
2
8
Summary of Contents for PARK n RIDE
