Monogram Sanitation
COMPONENT MAINTENANCE MANUAL
PN 15900-012 Series
38-31-07
Jan 10/95
Page 710
D.
Timer assembly, PN 11059-79 (refer to IPL Figure 4) as follows:
(1)
Procedures
(a)
If removed during disassembly, install identification decal (75).
(b)
Install grommet (70), sockets (90), plug (85), pins (65), plug (60), clamp (55),
connector (50) and disconnect (45).
(c)
Install PC board (15), using screws (40), terminal lug (35), lock washer (30),
washer (25) and nuts (20).
(d)
Install timer plate (5) in timer enclosure (80) using screws (10).
(2)
Storage Instructions
(a)
List of Materials
NOTE: Equivalent substitutes may be used for listed items.
(b)
Instructions
If the timer is to be stored after overhaul, seal in a plastic bag, wrap with barrier
material and place in a cardboard carton. Mark part number and date of overhaul
on outside of carton.
Bag
Plastic
Commercially Available
Barrier Material
MIL-B-121
Any Source
SOURCE
DESCRIPTION
ITEM