31-7000078 Rev.3
3
Design Information
PRODUCT DIMENSIONS AND CLEARANCES
TOOLS AND PARTS REQUIRED
(NOT SUPPLIED
)
•
#2 Phillips screwdriver
•
Hand-held drill
•
High speed drill bit, 3/32
Ǝ
diameter
•
3/8
Ǝ
slot-head screwdriver
•
Level
•
Saw
•
3/8” slot-head screwdriver
•
Wood screws or other hardware for installing
runner or shelf to support oven (if required)
•
Safety glasses or goggles
FLUSH MOUNT INSTALLATION
This installation method allows for the unit face to
be inline with the cabinet face.
IMPORTANT: HIGH SKILL LEVEL IN
CARPENTRY IS REQUIRED. Non-standard
cabinetry may be required.
Flush installation of the oven will lead to the
exposure of the cabinet face frame edges.
Side cleats may be visible and should be a
finished surface.
20-1/4”
26-3/4”
ADVANCE PLANNING
•
7KHVHRYHQVPD\EHLQVWDOOHGGLUHFWO\LQWRDƎ
wide oven cabinet with standard installation.
•
Cutout height dimensions are different for
installations with an accessory storage drawer.
Make sure to use the correct cutout when
preparing the opening.
• Allow for clearance to adjacent corners, walls,
drawers, etc.
The oven must be securely installed in a cabinet
that is firmly attached to the house structure.
Weight on the oven door could cause the oven
to tip and result in injury. Never allow anyone to
climb, sit, stand or hang on the oven door.
21-1/2
Ǝ
1
Ǝ
13 1/4
Ǝ
2-1/4
Ǝ
Door Depth
See table
below
Model
Door Depth
ZSB9121NSS
1-3/8”
Summary of Contents for Advantium ZSB9121N1SS
Page 13: ...31 7000078 Rev 3 13 Notes ...
Page 14: ...14 31 7000078 Rev 3 31 7000078 Rev 3 12 21 GEA Printed in China ...
Page 15: ...INSTRUCCIONES DE INSTALACIÓN Horno Advantium 120V 27 ESPAÑOL MONOGRAM COM MFL59060935 ...
Page 28: ...14 31 7000078 Rev 3 31 7000078 Rev 3 12 21 GEA Impreso en China ...
