Monogram ZIBI240, Design Manual With Installation Instructions

8

STEP 1    REMOVE PACKAGING  

AND INSTALLATION PARTS

• Remove corner blocks and foam drawer stops.
• Remove all packing material, tape and protective 

plastic coverings.

• Remove the toekick attached to the back of the unit.
• Remove the custom panel attached to the front of  

the unit.

WARNING

 Small objects are a choke hazard 

for children. Remove and discard any parts not used.

AVERTISSEMENT

 Les petits objets peuvent étrangler 

les enfants. Il faut jeter toutes les pièces qui ne sont pas 
utilisées.

Installation Instructions

STEP 2    REVERSING THE DOOR 

(ZIFI240 model only)

• Remove top hinge and discard.  Hold the door in 

place.

• Remove the black screw-hole cover from top left of 

cabinet and insert in top right.

• Remove the top trim cover and discard.

• Remove 4 screws to remove the top door trim (do NOT 

discard).

• Remove the top hinge pin (do NOT 

discard).

• Flip the door 180 degrees.

• Remove 3 screws to remove the bottom door trim (do 

NOT discard)

• Remove 2 screws to remove the door stop and discard 

door stop.

• Remove 1 screw to remove the bottom hinge pin and 

discard hinge pin.

  NOTE: Make sure the door is upside down so what was 

the bottom is now the top. 

• Insert the top hinge pin.

• Install top door trim onto the new top side of the door.

• Install the new top trim cover that snaps into place.

• Flip the door 180 degrees.

STEP 2    REVERSING THE DOOR 

(ZIFI240 model only)