Monogram ZV1050, Owner'S Manual

6

49-80513-5

METAL GREASE FILTER

Clean the grease filter after 30 hours of “on” time. A red 

signal light will alert you when 30 hours has passed.
Remove the grease filters and wash them either by hand 

or in the dishwasher using nonabrasive soap.
To clean, swish the filters in hot soapy water or wash them 

in the dishwasher. Do not use abrasive cleansers.
Replace the filters and make sure that they are correctly 

seated in the filter channels. Adjust as necessary until the 

red signal light stops glowing.

CARE AND CLEANING

FOR YOUR SAFETY

Before servicing or cleaning the unit, switch power off at 

the service panel and lock the service panel to prevent 

power from being switched on accidentally. If the service 

panel cannot be locked, securely fasten a prominent 

warning device, such as a tag, to the service panel.

NOTE:

 To remove filters, 

push them back and 

down using the knob.

Front

For proper operation, make sure the filters 

are securely seated into the channels.

HOOD SURFACES

Do not use a steel-wool pad; it will scratch the surface.

To clean the stainless steel surface, use warm, sudsy 

water or a stainless steel cleaner or polish. Always wipe 

the surface in the direction of the grain.

Follow the cleaner instructions for cleaning the stainless 

steel surface. To inquire about purchasing stainless steel 

appliance cleaner or polish or to find the location of a 

dealer nearest you, please visit our website:  

monogram.com