Design Information
4
Using Duct Cover Accessories
A Duct Cover Accessory may be required for your hood
installation height.
Use this chart to determine installa-
tion height and accessory for your ceiling height.
ZV950SDSS Installation Heights
* Based on 36
"
countertop height.
The serial plate is located behind the removable filters.
Actual
Ceiling
Height
7
'
11
"
8
'
0
"
8
'
1
"
8
'
2
"
8
'
3
"
8
'
4
"
8
'
5
"
8
'
6
"
8
'
7
"
8
'
8
"
8
'
9
"
8
'
10
"
8
'
11
"
9
'
0
"
9
'
1
"
9
'
2
'
9
'
3
'
9
'
4
"
9
'
5
"
9
'
6
"
9
'
7
"
9
'
8
"
9
'
9
"
9
'
10
"
9
'
11
"
10
'
0
"
14
'
0
"
* Possible Hood
Installation Height
24-1/2
"
25-1/2
"
25-1/2
"
to 26-1/2
"
25-1/2
"
to 27-1/2
"
25-1/2
"
to 28-1/2
"
25-1/2
"
to 29-1/2
"
25-1/2
"
to 30
"
25-1/2
"
to 30
"
25-1/2
"
to 30
"
25-1/2
"
to 30
"
25-1/2
"
to 30
"
25-1/2
"
to 30
"
25-1/2
"
to 30
"
25-1/2
"
to 30
"
26-1/2
"
to 30
"
26-1/2
"
to 30
"
26-1/2
"
to 30
"
26-1/2
"
to 30
"
26-1/2
"
to 30
"
30
"
min.
30
"
min.
30
"
min.
30
"
min.
30
"
min.
30
"
min.
30
"
min.
Duct Cover
ZX14S
DSS
SUPPLIED
OPTIONAL ACCESSORIES
ZX14SDSS,
optional stainless steel duct cover is available
for ceiling heights greater than 10 ft. and up to 14 ft.
Order the optional duct cover at the same time as the
vent hood and have on site before installation. This kit
contains hardware required for installation. This kit con-
tains installation hardware.
Note:
Duct covers must be installed as shown in this
book. Do not “build-in” the duct cover. If service is
required, the duct cover must be removed to access
hood components.
PRODUCT DIMENSIONS AND CLEAR-
ANCES (cont.)
