6
31-2000734 Rev. 4
INSTALLATION DIMENSIONS
The hood duct covers can be adjusted for different
ceiling heights depending on the distance between the
bottom of the hood and the cooktop (distance X). See
Installation Height Table.
Installation Preparation
DUCT COVER REQUIREMENTS
Duct cover kits must be purchased separately.
We recommend that the vent hood and duct cover
(if used) be on site before final framing and wall
finishing. This will help to accurately locate studs,
ductwork and electrical service.
•
Duct cover accessory comes with a lower and upper
duct cover and installation hardware.
•
The installation hardware includes mounting
brackets to secure duct covers to the wall.
•
The lower duct cover alone can be used and must
be secured with the duct cover bracket.
•
See table below for duct cover kit part numbers
based on model.
•
See the next page for duct cover installation height
information.
X = Distance from hood to cooktop. (Varies
depending on the installation) Required 24”
minimum over electric range or 30” minimum over
gas range. The recommended maximum is 36”.
Required Min & Recommended Max Ceiling
Height Examples for 10’ Duct Cover Kit
(Vented)
Electric
Gas
X = 24”
Y = Min 8’ 3”
Max 9’ 6”
X = 30”
Y = Min 8’ 11”
Max 10’ 2”
X = 36”
Y = Min 9’ 5”
Max 10’ 8”
Typical Range
Upper Duct
Cover
1” Min.
16-1/2”
Max.
20”
18”
X
36”
or
38”
Lower Duct Cover
Model
Duct Cover #
Max Ceiling
Installation
36” Model
ZX8D13SPSS
8’ 4”
ZX10D13SPSS
10’ 8”
ZX12D13SPSS
12’ 8”
48” Model
ZX8D14SPSS
8’ 4”
ZX10D14SPSS
10’ 8”
ZX12D14SPSS
12’ 8”
NOTE:
36” for typical
electric range and 38” for
gas range.
Y
