12. Safety advice and maintenance
10. Storage
11. Disposal
The device should only be connected to a properly installed 220-240 V power
point and has a protective conductor. This must be close to the equipment and
easily accessible, so that it can be detached from the mains if need be. Any adapter or exten-
sion cable must also have a protective conductor and be easily accessible so that it can be
detached from the mains if necessary.
Never insert any other objects other than laminating pouches that are intended for this
device, particularly metallic objects, into the pouch insertion slots.
Keep away from children.
Protect the device from moisture. The location of use must also be dry. Damp documents
should not be laminated. In the case of emergency, always pull the plug out from the mains.
The device is only designed to be used in the private sector.
The device generates heat when laminating. Strong sunshine or indoor heating can
exacerbate this situation and can cause the device to become faulty. In such cases, you
should also pull the plug out from the mains immediately.
The device has ventilation slots. These should not be covered up with other objects such as
magazines, cloths, etc.
After use, switch the device off , and then always pull the plug out from the mains.
The device automatically switches off if it overheats.
Only laminate at room temperatures (approx. 10–25°C).
The device should never be connected if the cable is damaged.
Plastic bags can present a danger. To avoid any danger of suff ocation, keep the bag away
from babies and children.
Please clean this machine only with a damp cloth.
Meaning of the warning symbols
Caution!
Read the instructions! ! Do not dispose
in the household
rubbish!
7
!
Importer : monolith GmbH • Maxstraße 16 • D-45127 Essen
www.monolith-support.com
©2016 • Made in China
