MONOMACHINE SYNTHESIS ARRANGEMENT
19
LOADING A KIT
1.
Open the KIT window by pressing the
[KIT]
key and select the LOAD icon using the
[ARROW]
keys.
2.
Press
[ENTER/YES]
to open the LOAD KIT window.
3.
The window presents a list of the kits stored in memory. Use the
[UP]
and
[DOWN]
keys
to choose among the 128 kit slots. Press
[ENTER/YES]
to load the kit of your choice. If
you want to exit without loading a kit, press
[EXIT/NO]
.
•
Kits that are not associated with any pattern are distinguished by a little star after
the kit name.
•
The kit currently loaded is indicated by an inverted selection box. The focus, when
moved away from the kit currently loaded, is a hollow square box.
LOADING AN EMPTY KIT
To get a clean kit, open the KIT LOAD window as described above and load a position
where no kit was previously saved. The empty positions are indicated with “--” as the kits in
the figure below.
After loading an empty kit, you will get six tracks loaded with the GND>SIN machine, and
all track effects and other parameters reset to default values.
SAVING AND NAMING A KIT
1.
Open the KIT window.
Summary of Contents for SFX-6
