INSTALLATION
1. Using one of the included video cables, connect the yellow, red, and white RCA plugs to
the corresponding jacks on your DVD player (or other video source device).
2. Plug the other end of the video cable into the RCA jacks on the back of the Transmitter
unit.
Rear View
Satellite
Receiver
Power
Adaptor
VCR
ON/OFF
Switch
DVD
S-Video cable
RCA cable
VCD
Rear view of
source device
3. (Optional) Plug the IR transmitter bulb into the
Remote Out
jack on the side of the
Transmitter unit. Position the transmitter bulb so that it can "see" the IR receiver "eye" on
the DVD player.
Side View
Cable, Satellite Receiver,
DVD player, VCR, VCD
IR OUT
Front View
ON/OFF
Switch
Power
Adaptor
Position the IR transmitter bulb so that it has a clear line-of-sight to the IR
receiver "eye" on the DVD player and is no more than about 18" away.
5
