11
14.
Insert the white connector on the shortest of the three cables into the
corresponding white connector on the left side Z-axis stepper motor.
15.
Insert the white connector on the short cable on the right side of the base into the
corresponding white connector of the right side Z-axis stepper motor.
16.
Use a lint-free cloth to wipe the top of the aluminum build plate to ensure that no
dust or other particles are present. Remove the protective backing from one of the
sheets of platform tape and carefully apply it to the platform, ensuring that no
bubbles are present. Note that you can also use painter's tape or Kapton® tape
instead of the included platform sheets.