26
13.
Click the Expert menu, then click the Switch to quickprint... option.
Congratulations, the software and drivers have been installed successfully! We will now
take you on a guided tour of the software and explain the various options.
Quickprint View
Quickprint Profile - Select one of the four
options in the
Quickprint profile section. This
entry determines the resolution/quality of
the printed object and the amount of time it
will take to print. You can select Fast print
(lowest quality), Normal print, High quality,
and Ulti quality (Ultimate). Try clicking the
various options and note how the projected
print time changes.
Material - Select one of three different material options, depending which type of filament
you will be using. The printer ships with sample PLA filament, but you can also select ABS
or U-PET, which is a newer filament material that combines the benefits of PLA and ABS.
Print Support Structure - This printer is capable of printing models with angles and
overhangs without support structures, depending on the severity of the angle or overhang.
However, it is usually better to use support structures to ensure a successful print. Put a
check mark in the box to print with support structures.