background image

SAFETY WARNINGS AND GUIDELINES 

 

This device is intended for indoor use only. 

 

Do not expose this device to water or moisture of any kind. Do not place drinks or 
other containers with moisture on or near the device. If moisture does get in or on 
the device, immediately unplug it from the power outlet and allow it to fully dry 
before reapplying power. 

 

Do not expose this device to excessively high temperatures. Do not place it in, on, 
or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct 
sunlight. 

 

Unplug this device from the power source when not in use. 

 

Prior to operation, check the unit and power cord for physical damage. Do not use if 
physical damage has occurred. 

 

Before plugging the unit into a power outlet, ensure that the outlet provides the 
same type and level of power required by the device. 

 

Do not allow the power cord to be crimped, pinched, stepped on, etc. Ensure that 
the power cord does not present a tripping hazard. 

 

Never unplug the unit by pulling on the power cord. Always grasp the connector 
head or adapter body. 

 

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or 
detergents. For stubborn deposits, moisten the cloth with warm water. 

 

This device has no user serviceable parts. Do not attempt to open, service, or 
modify this device. 

 

In the event of serious operating problem, stop using the unit immediately. 

 

Keep out of reach of children. 

 

Keep away from corrosive materials. 

 

 

Summary of Contents for 14600









Reviews: