6
OPERATION
1.
Place the unit on a stable surface, then plug it into a nearby AC power outlet. The
unit will beep and the indicators will illuminate steadily for 1 second, then will begin
flashing, indicating that it is in standby mode.
2.
Place a suitable ferrous-based pot or pan with food or liquid on the center of the
cooking zone. Do not attempt to heat an empty pot or pan.
3.
Press the On/Off button to turn the unit on. The display will show on. When
powered on, the unit will be set to the maximum temperature/power setting.
4.
Press the Temp or Power buttons to change the display to show the current
temperature or power setting. The unit will go back into standby mode if the Temp
or Power button is not pressed within about 30 seconds.
5.
Use the - and + buttons to adjust the displayed temperature or power setting. Use
the Max button to set the temperature or power setting to the maximum value.
6.
(Optional) If you wish to use the timer to set the cooking time, press the Timer
button, then use the - and + buttons to set the cooking time. During timed cooking,
the display will alternate between the remaining cooking time and the set
temperature or power level. You can use the - and + buttons to adjust the
temperature/power level during timed cooking. When the timer reaches 0:00, the
unit will automatically go into standby mode.
7.
When cooking is finished, press the On/Off button to set the unit into standby.
When using timed cooking, the unit will automatically go into standby mode when
the timer reaches 0:00. Do not touch the cooking surface until the unit has had time
to cool down.
TROUBLESHOOTING
Q1: The unit emits a series of beeps.
A1: Ensure that you are using compatible ferrous-based cookware between 4.7" ~ 10.2" (12
~ 26 cm) in diameter. Ensure the cookware is centered on the cooking area.
