If
you want to create a new profile, carefully read the section
Creation of New Printing
Profiles
section
.
Slice Thickness:
This field is to set the thickness of each slice in mm. The default is .05mm (20
slices per mm)
Exposure Time per Layer:
This time value specifies how long the projector will display an
image slice on a per-layer basis.
Bottom Layer
E
xposure
T
ime:
In order to ensure the model is properly adhered to
the bottom of a vat, a longer exposure time can be used for a specified number of
bottom layers.
# Bottom Layers:
This specifies the number of
Bottom Layers
that receive the
longer exposure time.
Blanking
T
ime
B
etween
L
ayers:
This is a time delay that allows the machine to perform a
Lift/tilt/slide. You may have to experiment with this value to determine a proper timing for
your
machine.
Resin Price per
L
iter
:
You can specify the cost of the resin used here. This is used to
calculate printing costs under
the
File->Calculate Volume & Costs
menu item.
Lift and Sequence Time:
This time specifies in milliseconds how long the lift and retract
sequence takes. You can use the
Auto Calc
button to generate a time estimate for the lift
and retract. This value may need to be modified based on the speed of your machine.
Lift Distance:
This is the distance that the printer will raise and lower the Z axis after the
exposure has taken place.
Z Lift Speed:
When a layer is printed on a bottom up machine, a large amount of force
may be required to separate the slide from the vat. This speed indicates how fast to
perform the lift, a slower speed may be required to help vat separation.
Z Lift Retract
S
peed
:
After the lift occurs, this speed indicates how fast the
Z
axis should
travel back to the initial
start position.
Slide/Tilt Value:
F
or machine
s
with a slide or tilt mechanism connected to the X axis,
this
value specifies how much to mo
v
e in conjunction with the Lift.
X/Y Pixel Offset:
This X/Y value allows you to offset the rendered image by a pixel amount.
30
Summary of Contents for 21824
Page 1: ...MONOPRICE MP Cadet LCD Resin Printer P N 21824 User s Manual ...
Page 32: ......
Page 34: ......