9
1.
Check the user's manuals for each display you will be connecting to the matrix to
determine its maximum video resolution and audio capabilities. Write them down
so you can remember what they are.
2.
Once you have determined the capabilities of each display, examine the list and
determine the lowest video resolution and the lowest quality audio type.
For example, say you have the following three displays:
4K television with 5.1-channel audio
1080p television with 2-channel audio
720p/1080i television with 7.1 channel audio
Based on this information, you would need to set the EDID for 720p/1080i video and
2-channel audio.
3.
Locate the row on the following table that matches the minimum capabilities of
your displays and set the DIP switches accordingly. Note that the DIP switch down
position is 0 and the up position is 1.
Video Resolution
Audio Type
DIP Switches
720p/1080i
2-channel
0 0 0 0
720p/1080i
5.1-channel Dolby/DTS
0 0 0 1
720p/1080i
HD
0 0 1 0
2D 1080p
2-channel
0 0 1 1
2D 1080p
5.1-channel Dolby/DTS
0 1 0 0
2D 1080p
HD
0 1 0 1
3D 1080p
2-channel
0 1 1 0
3D 1080p
5.1-channel Dolby/DTS
0 1 1 1
3D 1080p
HD
1 0 0 0
DVI 1024x768
2-channel
1 0 0 1
DVI 1920x1080
5.1-channel Dolby/DTS
1 0 1 0