10
DVI 1920x1200
HD
1 0 1 1
Copy from HDMI OUTPUT A
1 1 0 0
Copy from HDMI OUTPUT B
1 1 0 1
Copy from HDMI OUTPUT C
1 1 1 0
Copy from HDMI OUTPUT D
1 1 1 1
INSTALLATION
Perform the following steps to install the matrix/extender system.
1.
If you have not already done so, set the EDID DIP switches on the rear panel to
match the minimum capabilities of the displays you will be connecting.
2.
Ensure that all equipment to be connected is powered off and unplugged from its
power source.