36
Q8: Can the printer automatically turn off after a print job is complete?
A8: No.
Q9: Which file formats does the printer support?
A9: The slicing software can accept .3mf, .stl, .obj, .fpp, .bmp, .png, .jpg, and .jpeg files. The
printer itself can accept .gx or .g files, which are created by the slicing software.
Q10: Is ABS printing safe?
A10: ABS filament creates a noxious, poisonous gas when heated. Only use ABS filament in
a well-ventilated location. We recommend using non-toxic PLA when printing in the
presence of children.
Q11: What do I do if the printed model edges are warped?
A11: Activate the Raft option in the slicing software, then reslice the model. Try heating
the platform to the recommended temperature to increase model adhesion. Try
applying a solid glue to the platform before printing.
Q12: What do I do if the extruder makes a chugging noise, but no filament is extruded?
A12: Check to see if filament is loaded properly and that the guide tube is seated properly.
If filament is loaded and guide tube is seated properly, the nozzle is probably clogged.
Perform the steps in the
CLEARING A CLOGGED NOZZLE section above.
Q13: What is the difference between Filament Load and Filament Replace?
A13: Loading is performed when no filament is currently loaded. Replacing is a two-step
process that first unloaded the currently loaded filament, then loads another filament.
