13
12.
Scrape the print from the build plate into a small container. Fill the container with
Isopropyl Alcohol (91% or greater can be found at your local drugstore).
13.
Cover the container, then shake vigorously for about 30-60 seconds. Refer to the
MODEL CLEANING section for more detail.
14.
Place the finished print in sunlight to perform the final cure.
WI-FI® SETUP
Perform the following steps to configure the printer to connect with your home's Wi-Fi®
network. Use of Wi-Fi is not required, you can print from the microSD™ card if you do not
wish to use a Wi-Fi connection. Note that the printer can only connect to a 2.4GHz Wi-Fi
network. The Web UI can only be accessed using a Wi-Fi connection.
1.
Plug in and power on the printer. The first time it is powered on, the following
screen will be displayed.
2.
Open your web browser on your computer, then navigate to http://bit.ly/linksla
3.
Enter your Wi-Fi® SSID and password into the fields in your web browser, then click
the Generate button. The website will generate and download a file to the
Downloads directory on your PC that contains your Wi-Fi login information.