13
2. Press and hold the
PAIR
button on the
Subwoofer or Surround for a few seconds.
»
The Pair indicator on the Subwoofer or
Surround will rapidly blink.
3. Then press
on the unit or remote control
to switch the unit ON.
»
The Pair indicator on the Subwoofer or
Surround will become solid when successful.
4. If the Pair indicator blinks, the wireless
connection has failed. Unplug the cable
of the Subwoofer or Surround and then
reconnect the main cable after 4 minutes.
Repeat step 1 ~ 3.
NOTE:
•
The Subwoofer&Surround should be within
6 m of the Soundbar in an open area (the
closer the better).
•
Remove any objects between the
Subwoofer&Surround and the Soundbar.
•
If the wireless connection fails again, check
if there is a conflict or strong interference
(e. g. interference from an electronic device)
around the location. Remove these conflicts
or strong interferences and repeat the above
procedures.
•
If the main unit is not connected with
the Subwoofer&Surround and it is in
ON mode, the Pair Indicator on the
Subwoofer&Surround will blink slowly.
6. Basic Operation
6.1 Standby/ON
When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
•
Press the button on the unit or on the
remote control to switch the unit ON.
•
Press the button again to switch the unit
back to STANDBY mode.
•
Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
•
Auto Wake
-
If a TV or an external device is connected
(AUX / HDMI ARC), the unit will switch on
automatically when the TV or the external
device is switched on.
•
Automatic Power Off Function
-
The unit automatically turns to
Standby
mode after about 15 minutes if the TV or the
external unit is disconnected, switched off.
-
To switch the unit off completely, remove the
mains plug from the mains socket.
•
Please turn the unit off completely to save
energy when not in use.
6.2 Select Modes
Press the
(SOURCE)
button on the unit or the
AUX
,
BT, OPT/COA, HDMI 1/2, HDMI eARC
and
USB
and
buttons on the remote control to select
the desired mode. The selected mode will shows
on the display.
6.3 Adjust the Bass/Treble Level
•
Press the
BASS +/-
buttons on the remote
control to adjust bass level.
•
Press the
/-
buttons on the remote
control to adjust treble level.
6.4 Turn the Surround Sound ON/OFF
•
Press the
VERTICAL/SURROUND
button on
the remote control to turn on the surround
sound. Press this button again to turn off the
surround sound.
6.5 Select Equalizer (EQ) Effect
•
Press the
VOICE / SPORT / MOVIE / MUSIC
buttons on the remote control to select your
desired preset equalizer effects.
6.6 Adjust the Volume
•
Adjust the Soundbar’s Volume
Press the
+ / - (VOL)
buttons on the unit or
on the remote control to adjust the volume.
If you wish to turn the sound off, press the
(MUTE)
button on the remote control.
Press the
(MUTE)
button again or press
the
+ / - (VOL)
buttons on the unit or on the
remote control to resume normal listening.
•
Adjust the Surround’s Volume
Press
SURR+/-
(surround) to increase or
decrease the Surround’s volume level.
