Plug a USB media device (e.g., flash drive, hard drive, etc.) into the USB port to enable selection
and playback of mp3 files. Perform the following steps to locate and select mp3 files for playback
from the attached USB media device:
a. Plug the USB media device into the USB port.
b. Press the Source button (29) to select the USB source.
c. Press the Folder button (6) to enter Navigation mode and view the folder/directory structure
on the USB device.
d. Use the Search buttons (7) to move the highlight to the desired file or folder/directory.
e. Press the Folder button (6) again to open a highlighted folder/directory.
f. Use the Next and Previous Track buttons (8) to highlight a specific track within the current
folder/directory.
Press this button to select CD or USB mode.
Use the 0-9 buttons to select a specific track on the CD.
This LCD display shows the track number, time, pitch, and playback mode (single/continuous).
Press this button to set the start point of a loop. The start point is shown on the LCD display.
Press this button to both set the end point of the loop and to start the loop. Press the button again
to finish the loop.
Press this button to start the last saved loop. Press the button again to finish the loop.
JOG/SHUTTLE WHEEL
The functionality of the Jog/Shuttle wheel is determined by the Pitch Bend/Search/Scratch button
(11).
The LED on the button indicates the active mode/functionality of the wheel:
* Pitch Bend: When in pitch bend mode (LED off), moving the wheel clockwise increases the
pitch and moving it counterclockwise decreases the pitch. The speed of the wheel determines
how fast the pitch is changed. Stop the wheel's movement to let the pitch return to normal.
* Search: When in search mode (LED on), moving the wheel clockwise moves the play point
forward and moving it counterclockwise moves the play point backward. The speed of the
wheel determines how fast the play point is moved. Stop the wheel's movement when you are
at the desired play point.
* Scratch: When in scratch mode (LED flashing), moving the wheel back and forth produces a
"scratch" effect in the same way as scratching vinyl record on a traditional turntable.
Press this button to activate the Pitch + / - slider.
Press and hold this button to drop the pitch. Release it to return to the original pitch.
DISC TRAY
Press and hold this button to increase the pitch. Release it to return to the original pitch.
Use the EJECT button (1) to open the disc tray. Insert a CD into the opened tray, then press the
EJECT button again to close the disc tray.
4
