7
INSTALLATION
1.
Ensure that all equipment to be connected is powered off and unplugged from its
power source.
2.
Place or mount the Audio Extractor at the desired location.
3.
(Optional) Using a digital optical S/PDIF cable (not included), plug one end into the
digital optical input on your amplifier or receiver, then plug the other end into the
Optical Out jack on the extractor.
4.
(Optional) Using a 3.5mm stereo audio cable (not included), plug one end into the
audio input of your amplifier or receiver, then plug the other end into the L/R Out
jack on the extractor.
5.
Using a High Speed HDMI® Cable (not included), plug one end into the HDMI input
on your television, then plug the other end into the HDMI Out jack on the extractor.
6.
Using a High Speed HDMI Cable (not included), plug one end into the HDMI In jack
on the extractor, then plug the other end into the HDMI output on your video
source device.
7.
Plug the DC barrel connector on the included AC power adapter into the DC 5V jack
on the extractor, then plug the adapter into a nearby AC power adapter. The Power
LED will illuminate to indicate that power has been applied.
8.
Plug in and power on all connected equipment. Start video playback on your video
source device. The Link LED should illuminate when the HDMI video is detected.
Verify that video can been seen on the connected display and that audio is being
extracted to your amplifier or receiver.