7
Press the AUTO button to toggle automatic switching on or off. When automatic
switching is enabled, the LED will illuminate blue.
4.
OUTPUT RESOLUTION BUTTONS: Press the buttons to set the output resolution to
4K@60Hz, 4K@30Hz, 1080p, or 720p. The switch/scaler will automatically scale the
resolution to match the selected resolution. To select other resolutions, use the
included IR remote control or the RS232 control option.
Rear Panel
1.
OUTPUT: An HDMI® video output port and a 3.5mm stereo analog audio output.
2.
INPUT: Four HDMI video input ports, a VGA port that is capable of accepting VGA,
Component (YPbPr), and Composite (CVBS) video, and a 3.5mm stereo analog audio
input
3.
CONTROL: A USB port for connecting a USB flash drive for firmware updates, a 3-pin
terminal block for connecting to a computer's RS232 serial port, and a 3.5mm jack for
connecting the included IR receiver.
4.
DC 12V: DC barrel connector for connecting the included AC power adapter.
5.
POWER SWITCH: Power switch for turning the unit on or off.