background image

9

General Slicer Settings

If using any other slicer besides KISSlicer, you can follow 
these guidelines and the guidelines on the Delta Pro webpage 
to configure your preferred slicing software for use with your 
machine. For the latest profiles and tips, please check the 
product’s webpage and Facebook page regularly.

Machine Settings:

•  Build Plate / Bed Diameter: 270 mm

•  Build Envelope Height: 340 mm

•  Firmware: 5D Absolute E

•  File Extension: .gcode

•  Fan On: M106 / Off: M107 (Fan can do PWM or blip to speed)

•  Maximum Recommended Speed Settings:

•  Bottom, Top, and Perimeter: 30 mm/s

•  Loops and Infill: 60 mm/s

•  Travel: 100 mm/s

•  Z-speed: 50 mm/s

•  Max Acceleration: 1000 mm/s

•  For G-code pre-, and postfixes, visit the Delta Pro webpage

SLICING AND PRINTING

General Settings

(Note: These are general settings guidelines and fine 
adjustments WILL need to be made for different materials):

•  Extrusion Width: 0.4 mm

•  Min. Flow Rate: 1 mm3/s

•  Max. Flow Rate: 4 mm3/s

•  Destring/Retraction Distance: 3-6 mm

•  Destring/Retraction Speed: 100 mm/s

Selecting a File

To select a file, tap        , then use the arrows to highlight your file, 
ten  tap        

OK

 and then tap 

Yes

 to begin printing. 

Summary of Contents for Delta Pro

















Reviews: