background image

SAFETY WARNINGS AND GUIDELINES 

Please read this entire manual before using this device, paying extra attention to these 
safety warnings and guidelines. Please keep this manual in a safe place for future reference. 

 

This device is intended for indoor use only. 

 

Do not expose the motor base to water or moisture of any kind. If water or moisture 
does get into the motor base, immediately unplug it from the power source and 
allow it to thoroughly dry before using it again. 

 

Prior to operation, check the unit and power cord for physical damage. Do not use if 
physical damage has occurred. 

 

Unplug this device from the power source when not in use, before removing food, 
before assembly/disassembly, and before cleaning. 

 

Do not touch the parts that move while the unit is plugged into its power source. 

 

This device has no user serviceable parts. Do not attempt to open, service, or 
modify this device. 

 

Never unplug the unit by pulling on the power cord. Always grasp the connector 
head. 

 

Do not touch the device or the power cord with wet hands. 

 

Always clean the blender cup(s), lids, and blade base immediately after use. The 
cups, lids, and blade base can are dishwasher safe. 

 

Do not operate the blender motor continuously for more than 1 minute. Do not 
operate it again until after 1 minute has elapsed. 

 

Never operate the blender with an empty blending/drinking cup. 

 

Never fill the blending/drinking cups beyond the Max line on the side. 

 

Cut all food into pieces no larger than 3/4" to 1" in size. 

 

Never blend hot ingredients. Always allow ingredients to cool before blending. 

 

Never leave the blender unattended during operation. 

Summary of Contents for El Niño 1000









Reviews: