33
GETTING STARTED
1.
Open the box and remove the printer from the protective foam. Set it on a flat,
stable surface, then remove the plastic film.
2.
Use a pair of scissors or side cutters to remove the zip ties and silicon rubber sheets
on the Z-axis.
3.
Use the included 2mm Allen wrench and the included spanner to remove the fixed
support on the Z-axis.
4.
Remove the microSD™ card from the accessory box and insert it in the card slot to
the left of the display. Next, remove the included AC power cord, plug one end into
the AC power socket on the left side of the printer, then plug the other end into a
nearby AC power outlet.