34
5.
Remove the filament holder from the accessory box and install it inside the printer.
Remove the spool of filament and hang it on the filament holder, then insert the
end of the filament into the sensor until it comes out of the tube.
6.
Press the extruder handle, then insert filament into the hold to a depth of about
4cm.
7.
Open the Control menu, then choose the Filament In options. Wait for the filament
to finish loading.
8.
Go back to the Main menu, then select the Print from SD option. Locate and select
one of the gcode files on the microSD™ card to start your first print.